CompactMIG 280 K
Kompaktan stroj s mogućnošću struje zavarivanja od 280 A.
Zanima Vas ovaj proizvod? Stavite ga u košaricu te nam pošaljite zahtjev za ponudu. U roku od 24h na Vašu e-mail adresu stići će naša ponuda.
Primary:
Voltage: 3 x 400 V
Frequency: 50 / 60 Hz
Continuous power: 10.4 kVA
Continuous current: 14 A
Max. current: 28 A
cos phi (350 A): 0.8
cos phi (200 A): 0.85
Secondary:
Open circuit voltage: 17 – 48 V
Welding voltage: 15 – 34 V
Welding current: 25 – 400 A
Duty cycle 30 % (10 min.): 400 A (40 °C)
Duty cycle 60 % (10 min.): 300 A (40 °C)
Duty cycle 100 %: 250 A (40 °C)
Protection class: IP 23
Insulation: H
Cooling: AF
Mains switch:
Voltage control: 14 steps
Operation modes: 2-/4-stroke/stitch/spot welding
Wire feed speed: automatic setting through synergic
controller (can be switched off)
Arc trim: adjustable +/- 30 % at
potentiometer or TEDAC torch
Wire selection: selector switch
Wire burn back: adjustable
Spot welding/interm. time: adjustable
Creep start: adjustable
Safety cut-off: in 4-stroke operation
Wire insertion auto: in 2-stroke operation
Functions: gas test
wire inching
Digital display: 2 digital displays for current,
voltage, wire feed speed and
material thickness with hold function
Control lamp: mains on, temp. protection, failure
Controller: MAG 30 plug-in controller
at the front panel
Choke: 100 %, option: 60 %
Norm: EN 60974-1 “S” / CE
Torch cooling: gas cooled
Gas bottle holder: 10, 20, 50 l cylinders
Mains supply cable: 4 x 4 mm² 5 m long
with plug 3 x 400 V / 32 A
Gas hose: 2 m long
Socket 50 mm²: for earth lead
Lifting eyes: 4 pieces as option
Weight: 140 kg
Dimensions l x w x h: 940 x 480 x 760 mm
Wire feeder: compact mounted, model DV-26
Supply: 26 V-DC
Wire feed motor: DC motor with worm gear drive, range 0-1-2 0.7 – 25 m/min.
Gear: 4-roller-drive DV-26
Wire feeder support: D 300/15 DIN 8559
Torch connection: Euro connector
Standard wire equipment: mild steel 1.0 mm
Kompaktan stroj s mogućnošću struje zavarivanja od 280 A.